JRi 1.75" - 3" 2024 Gen 4 Toyota Tacoma Leveling Kit with 6-Stage Adjustable Coilover Remote Reservoir Shocks + Freedom Off-Road Front Upper Control Arms

Freedom Off-Road

JRi Shocks brings over 100 years of collective experience in race shock absorbers to team up with Freedom Off-Road in offering the ultimate suspension kit for your 4th Gen Tacoma.

The front shocks are designed for a 1.75-inch lift but still allow for finer ride height adjustment via the spring preload. All four shocks feature 2-stage remote compression adjusters on each reservoir, allowing you to fine-tune your suspension to correlate with your terrain and comfort. 

Offering an oversized 2.0" bore diameter and .75" shaft diameter, these shocks exceed all OE strength specifications & requirements.

The oversized remote reservoirs offer increased nitrogen area, providing consistency & temperature stability in any condition, resulting in constant performance. The -6 Stainless braided lines use a unique O-ring fixture device that allows complete 360° swiveling capability, relaxing any stress or torque applied to the hose in normal shock absorber motion.

Improves off-roading experience handling through the desert, trails, whoops, etc.

This JRi shock is dyno-tested to ensure excellent performance and offers FREE lifetime rebuilds.

Technical Advantages

• Cerakote finish on the shock bodies for excellent corrosion resistance
• Hard Anodize Type III for the reservoir body
• Sulfuric Anodize Type II for all remaining 6061-t6 aluminum parts, including internals
• Premium synthetic hydraulic fluid
• High-temperature low friction primary shaft seals and bearing
• 33" tire and wheel fitments with no interference
• Completely rebuildable & serviceable
• Limited Lifetime Warranty
• Hand built and every shock dynamometer tested, and data stored at JRi
• Remote reservoir mounting hardware included
• Designed and manufactured in the U.S.A.

• CONTROL ARMS DESIGNED TO CORRECT BALL JOINT ANGLE ON VEHICLES LIFTED 1.75"-3" WHILE MAINTAINING FACTORY ALIGNMENT SPECS
• 1.5" TUBING WITH PROVISIONS FOR BRAKE/ABS LINES (WHERE APPLICABLE) AND GUSSETS FOR INCREASED STRENGTH
• HEAVY DUTY OEM STYLE BALL JOINTS AND HARDENED RUBBER BUSHINGS REDUCE DEFLECTION WITH MINIMAL MAINTENANCE
• BALL JOINTS COME PRE-GREASED AND ARE FULLY REPLACEABLE